<def-item> Definition List: Definition Item

One item in a definition (two-part) list.
Related Elements
A <def-list> may take a <label> that provides it with a number, followed by an optional <title> naming the entire list, followed by optional headings for terms and their definitions. <term-head> contains the heading over the first (term) column, and <def-head> contains the heading for the second (definition) column; neither serves as a container element for terms or definitions. Individual <term>s and their <def>s are paired in <def-item>s. Definition lists are recursive, so following all the terms and definitions, there may be one or more embedded <def-list> elements.
Attributes

Base Attributes

Models and Context
May be contained in
Description
The following, in order:
Content Model
<!ELEMENT  def-item     %def-item-model;                             >
Expanded Content Model

(term, def*)

Tagged Samples
Definition List describes abbreviations
...
<sec sec-type="abbreviations" id="s4">
 <label>4</label>
 <title>Abbreviations and acronyms</title>
 <def-list>
  <title>Abbreviations:</title>
  <def-item>
   <term>CCD</term>
   <def><p>Charge Coupled Device.</p></def>
  </def-item>
  <def-item>
   <term>CMOS</term>
   <def><p>Complementary Metal Oxide Semiconductor.</p></def>
  </def-item>
  <def-item>
   <term>LED</term>
   <def><p>Light Emitting Diode.</p></def>
  </def-item>
 </def-list>
</sec>
...
As part of Glossary
...
<sec sec-type="definitions">
 <label>1.10</label>
 <title>Glossary</title>
 <glossary>
  <def-list>
   <def-item>
    <term>bend qualification procedure</term>
    <def><p>a document that specifies the
     properties of the starting pipe; the equipment to be used;
     the bending parameters; the qualification bend test
     results; and the postbend, heat-treat equipment and
     cycle used for the manufacture of the bends. If nondestructive
     testing of the bend is required, procedures that
     have not been approved previously shall be submitted.</p></def>
   </def-item>
   <def-item>
    <term>cylinder</term>
    <def><p>a joint of pipe produced by a rolling andwelding
     plate, as opposed to a joint of pipe produced in accordance
     with a recognized specification.</p></def>
   </def-item>
   <def-item>
    <term>extrados</term>
    <def><p>the outside arc of the bend.</p></def>
   </def-item>
   ...
  </def-list>
 </glossary>
</sec>
...
Related Resources